LÖVE 11.1 released!

General discussion about LÖVE, Lua, game development, puns, and unicorns.
User avatar
pgimeno
Party member
Posts: 3672
Joined: Sun Oct 18, 2015 2:58 pm

Re: LÖVE 11.1 released!

Post by pgimeno »

milon wrote: Thu Apr 19, 2018 8:10 pm Incidentally, I discovered that running (from the Terminal) ./love works where love does not. The latter seems to make it look for a command or bash script, where the former tells it to open the file as an executable. Just in case that's helpful to anyone. :)
It's standard practice in Linux that commands are ONLY looked for in the path, and not in the current directory. That will happen with each and every program that is not in your path, e.g. 'configure', unless you run 'sudo make install' and it's installed to a directory in your path (e.g. /usr/bin or /usr/local/bin; try ./configure --help to see or change the defaults). You can add . to your path but that's really not recommended.
User avatar
Rucikir
Party member
Posts: 129
Joined: Tue Nov 05, 2013 6:33 pm

Re: LÖVE 11.1 released!

Post by Rucikir »

As the developer of love-release, I'm confused.
You have dropped the "patch" version number (11.1 instead of 11.0), and the filename is love-11.1-win64.zip (without the patch number), but inside the zip file, you kept the patch number: love-11.1.0-win64/love.exe, which forces me to make a special case for this.

It's a silly thing though :p
User avatar
pgimeno
Party member
Posts: 3672
Joined: Sun Oct 18, 2015 2:58 pm

Re: LÖVE 11.1 released!

Post by pgimeno »

Yeah; I was expecting that the new versioning scheme would be closer to semantic versioning, and 11.1 to have been 11.0.1 instead.
User avatar
Klius
Prole
Posts: 6
Joined: Wed Jan 10, 2018 9:00 pm
Contact:

Re: LÖVE 11.1 released!

Post by Klius »

Hi! i have updated just now and love.graphics.print seems to do nothing.
I've tried doing a simple love file to see if it was something wrong with my project but i doesn't look like it.

Code: Select all

function love.load()

end
function love.draw()
  love.graphics.setColor(1,1,1,1)
  love.graphics.print("This is text",0,0)
end
function love.update()
end

function love.keypressed(key)
  if key == "escape" then
    love.event.quit()
  end
 

end
Update
Updated to 11.1 in another computer and it works fine, it must be something wrong about my pc :crazy:
booyaa
Prole
Posts: 1
Joined: Thu Apr 26, 2018 11:10 am
Contact:

Re: LÖVE 11.1 released!

Post by booyaa »

Folks,

I found a handy tip for quickly patching LÖVE 10.0 code with the value change in R,G,B. Divide the old value by 255 i.e. http://love.graphics .setColor(128, 32, 32, 192) becomes love.graphic.setColor(128/255, 32/255, 32/255, 192/255)

Saw this in stackoverflow https://stackoverflow.com/a/10849043

Hope this helps!

p.s. Also found a dedicated thread on our forum with a detailed discussion of the pros and cons of various approaches (also why the jump a scale of 0 to 1 happened). viewtopic.php?f=4&t=85084
User avatar
milon
Party member
Posts: 472
Joined: Thu Jan 18, 2018 9:14 pm

Re: LÖVE 11.1 released!

Post by milon »

Klius wrote: Wed Apr 25, 2018 8:22 pm Hi! i have updated just now and love.graphics.print seems to do nothing.
I've tried doing a simple love file to see if it was something wrong with my project but i doesn't look like it.

Code: Select all

...
Update
Updated to 11.1 in another computer and it works fine, it must be something wrong about my pc :crazy:
I tested in Win10 x64, with Love 11.0 and 11.1, and it works fine on both. I agree - must be your PC. Check your graphics drivers, supported OpenGL version, etc?
Any code samples/ideas by me should be considered Public Domain (no attribution needed) license unless otherwise stated.
User avatar
Klius
Prole
Posts: 6
Joined: Wed Jan 10, 2018 9:00 pm
Contact:

Re: LÖVE 11.1 released!

Post by Klius »

milon wrote: Thu Apr 26, 2018 11:08 pm I tested in Win10 x64, with Love 11.0 and 11.1, and it works fine on both. I agree - must be your PC. Check your graphics drivers, supported OpenGL version, etc?
Hi!
Tried setting LOVE_GRAPHICS_USE_GL2=1 like in here viewtopic.php?f=3&t=85065&start=10#p219751 , and it doesn't work.
My pc is win7 x64 with an ATI radeon hd 4500. from love.graphics.getRendererInfo i get this:
Name: OpenGL
Version: 3.3.11672 Core Profile Context
Vendor: ATI Technologies Inc.
Device: ATI Radeon HD 4300/4500 Series

Sorry for answering so late ^^"
DarkShroom
Citizen
Posts: 86
Joined: Mon Jul 17, 2017 2:07 pm

Re: LÖVE 11.1 released!

Post by DarkShroom »

you guys are militant, working with love 2d is like working in a boot camp!

i get it's a philosophical choice, and perhaps even why love 2d is so good, but i haven't been coding love 2d since about december last year, you must admit love 2d certainly has some api cycle
User avatar
undef
Party member
Posts: 438
Joined: Mon Jun 10, 2013 3:09 pm
Location: Berlin
Contact:

Re: LÖVE 11.1 released!

Post by undef »

Woohoo, I even missed LÖVE 11, I should try this out soon! :D
Thanks!
twitter | steam | indieDB

Check out quadrant on Steam!
topitsky
Prole
Posts: 1
Joined: Mon May 07, 2018 4:19 pm

Re: LÖVE 11.1 released!

Post by topitsky »

Any way of building the current version for android? When I try pushing it to .love and open on android it doesnt work nearly as it was supposed to be.
Post Reply

Who is online

Users browsing this forum: Ahrefs [Bot] and 12 guests